PlatSil® 71-40 Silicone Rubber is a two-part, platinum-catalyzed, liquid silicone system that cures (RTV) to a translucent, Shore A40 rubber. This is a pourable rubber, but it can be easily thickened with Sil-Thix Liquid Thickener for brush-on application.
Product Description
• Excellent flow
• Medium Shore 40A Hardness
• Fast low-shrink cure with good pot life of 90 minutes
• 24 hour cure time
• High tear strength & high elongation
• Good resistance to casting resins, plaster, gypsum and cement based products.
Previous product
Back to products
Large Mandala Coaster Silicone Mould
$28.75 (inc. gst)
Next product
Poly 74-45 80lb
$1,322.50 (inc. gst)
Platsil 71-40 Silicone Rubber 20kg
$1,725.00 (inc. gst)
Available at:
Auckland
Description
Related products
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Woven Bangle Mould
MLD-B1
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Long Plastic Stirrer
Long plastic stirrers are designed for paint mixing but work well with resins and other materials.
Forton MG
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
Rounded Square Bangle Mould
MLD-B14
Plastic Putty Knife 2 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
