Use Alumilite dyes to add colour to your casting resins! These opaque dyes may be used in both clear and opaque resins. Always conduct your own tests to see if the dye and resin combination achieve the colour you require!
Previous product
Back to products
Measuring Cup 30ml
From $5.52
Next product
Chopped Strands 6mm
From $46.00
Alumilite Flo Dye
$17.25 (inc. gst)
Description
Use smallest amount possible to achieve desired colour (up to 5%)
Alumilite Dye is very concentrated. In some instances it’s necessary to use less than 1 drop to achieve colour in a small resin batch. This can be achieved by adding a drop of dye to the tip of a mixing stick rather than dispensing into the resin.
Opaque dyes contain fillers that may settle in the bottle. To maintain consistent colour, agitate/stir prior to use.
Related products
Chopped Strand Mat 600gm
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Pipette Dispenser
An easy and economical way of measuring out those small amounts of MEKP catalyst and colouring resin among other applications.
Aluminium Granules
Aluminium Granules are commonly used as a filler in resin moulds for vacuum forming and low pressure injection. Imparts high
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
Iron Powder
Iron powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Q-Cel 520
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
JA12 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA12 stick is between 210-280 grams***
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
