This ready to use silicone mould is great for creating long, twisted square bars. These moulds are great for Epoxy and UV resin casting. No release agent is required. Jewelery screws and hooks may be inserted into the resin at the top of the mould. Keep away from abrasive materials to avoid scratching the silicone. Mould may be washed with warm, soapy water.
Measurement: approx. 0.9cm (W) x 4.6cm (L) / 0.35″ (W) x 1.81″ (L)
Previous product
Back to products
Silicone Mould Square Bar 46mm
$13.80 (inc. gst)
Next product
Silicone Mould Heart Box 74x75mm
$34.50 (inc. gst)
Silicone Mould Twisted Bar 46mm
$13.80 (inc. gst)
Available at:
Auckland
Description
Related products
Chopped Strand Mat 300gm
Our CSM 300gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Chopped Strand Mat 600gm
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Brush Latex
Brush latex is a moulding compound based on pre-vulcanized natural rubber latex. Pre-vulcanized latex is recommended for mould production as
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Plastic Cups
The plastic polypropylene cups are great for mixing resins and silicones, especially when you ant clarity and visibility of the
Plastic Putty Knife 2 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Glossy Cuff Bangle Mould
MLD-B13
Icypole Sticks
Icy pole sticks for mixing resins, not recommended for silicone or viscous materials. Great for adding and blending liquid and
