Our Signet Ring Mould is a ready to use silicone mould that may be used with a variety of casting materials. An appropriate casting resin such as an epoxy or polyurethane is a popular choice, but other materials like wax may also be used. The mould was made from a ring which was originally sculpted from clay and is handmade in character. Note: all measurements are approximate. Due to the handmade nature of this mould, imperfections may exist in the mould and dimensions may change when cast piece is sanded.
Finish: Gloss
Resin required to fill: Approx. 10ml
Ring size: O-P
Previous product
Back to products
Tom Thumb Ring Mould
$28.75 (inc. gst)
Next product
Dome Ring Variation No.4 Mould
$28.75 (inc. gst)
Signet Ring Mould
$28.75 (inc. gst)
MLD-R7
Available at:
Auckland
Description
Related products
Tongue Depressors Box 100/Box
Wooden tongue depressors allow for mixing of resins, silicones and blending pigments.
Plastic Putty Knife 2 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Classic Bangle Mould
MLD-B10
Brush Latex
***PLEASE DO NOT USE THIS FOR DIPPING – THIS IS A THICKENED FORMULA FOR BRUSHING***
Measuring Cup 60ml
These 60ml measuring cups can be used to measure small volumes of resin, silicone catalyst, or for decanting small volumes
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
