PT Flex 50 Liquid Rubber is a two-part, liquid polyurethane system that cures (RTV) to a yellow/amber, Shore A50 rubber. PT Flex Series rubbers were specifically designed for prototyping and model making applications and offer fast pour times (~5 minutes) and fast demold times (~2 hours).
Previous product
Back to products
EasyFlo 60
$1,207.50 (inc. gst)
Next product
SC-24 Polyurethane Accelerant
From $40.25
PTFLEX 50
From $460.00
Related products
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Eye Dropper
Eyedroppers are ideal for adding liquid pigments to resins, or for creating effects in resin art using Isoproyl Alcohol or
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
Industrial Talc
Industrial Talc is a budget priced filler for reducing cost and exotherm in resins. Also used as a surface tension
Langridge Dry Artist Pigment
Langridge Dry Artist Pigments offer gorgeous metallics, intense opaques and vibrant fluoros, that can be used to pigment our resin
Megapour Deep Cast Epoxy Resin
Megapour Epoxy Resin Deep Casting System is an epoxy resin system specifically designed for deep pouring and large castings. It
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
D-Limonene 1L
DLIM-S
