PT Flex 20 Liquid Rubber is a two-part, liquid polyurethane system that cures (RTV) to a tan, Shore A23-25 rubber. This is the softest rubber in the PT Flex line of polyurethane mold rubbers. PT Flex Series rubbers were specifically designed for prototyping and model making applications and offer fast pour times (~4 minutes) and fast demold times (~2 hours).
Previous product
Back to products
Poly 74-45 80lb
$1,322.50 (inc. gst)
Next product
PTFLEX 70 16lb
$460.00 (inc. gst)
PTFLEX 20 80lb
SKU: U-PTFLEX20-L
$1,725.00 (inc. gst)
Available at:
Auckland
SKU: U-PTFLEX20-L
Categories: Casting, Flexible, Polyurethane Resin
Related products
Iron Powder
From $36.80
Iron powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Q-Cel 520
From $103.50
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
Forton MG
From $51.75
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
Epoxyglass Clear Coating Epoxy Resin
From $92.00
EPOXYGLASS is a two part ultra clear epoxy coating resin used by professional artists and hobbyists Australia wide. EPOXYGLASS is
Chopped Strand Mat 600gm
$12.65 (inc. gst)
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Pipette Dispenser
From $5.75
An easy and economical way of measuring out those small amounts of MEKP catalyst and colouring resin among other applications.
Barnes 6L Vacuum System
$632.50 (inc. gst)
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Isopropyl Alcohol
From $19.55
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.