Add UV additive to polyurethane liquid rubbers and plastics to improve exterior durability and reduce surface degradation caused by sunlight or other UV light sources. Add 0.5% of the total mix weight of the rubber or plastic. NOTES: Add UV Additive to Part B prior to mixing with Part A
Previous product
Back to products
TC892 Slow Set Rigid Polyurethane
From $218.50
Next product
Wax Fillet
$218.50 (inc. gst)
Polyurethane UV Additive
$103.50 (inc. gst)
Related products
D-Limonene 1L
DLIM-S
Aluminium Granules
Aluminium Granules are commonly used as a filler in resin moulds for vacuum forming and low pressure injection. Imparts high
Aluminium Powder
Aluminium Powder is traditionally added to resins to aid in high temp applications such as vacuum forming. It is commonly
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
Forton MG
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
