PlatSil Accelerator accelerates the pour times and demold times of PlatSil products. The addition of 1% Accelerator to the total mixed weight decreases the pour time to 1/3 the normal pour time. The addition of 2% decreases the normal pour time to 1/4. The addition of 3% decreases the normal pour time to 1/6. The demold time will also be reduced. Experiment on a small scale before making a larger mix. NOTES: Add Accelerator to Part B prior to mixing with Part A.
Previous product
Back to products
Silicone Mould Geometric 8 Cavity
$14.95 (inc. gst)
Next product
Platsil Gel-0030 Prosthetic Grade Silicone
From $172.50
PlatSil Accelerator
From $132.25
Related products
Eclipse Bangle Mould
MLD-B11
Plastic Putty Knife 3 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Rounded Square Bangle Mould
MLD-B14
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Forton MG
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
Geltex Latex Thickener
Geltex Latex Thickener is used in latex moulding rubbers. Add up to 2% and shear mix until the desired consistency
Brush Latex
Brush latex is a moulding compound based on pre-vulcanized natural rubber latex. Pre-vulcanized latex is recommended for mould production as
