Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha gypsum (USG-FGR95) it is blended with. This particular kit is made up of two components, an alpha gypsum and a specially formulated, all acrylic co-polymer (50% solids). This product may be used to cast solid parts, rotationally cast, brushed on for projects such as mould jackets and hand layups in conjunction with fibreglass materials and scrim materials for added strength. This system is for interior or protected use only. Metal Powders and Pigments may be added, please check data sheet for recommended ratio and details. We recommend that this system is mixed/sheared mechanically and not by hand for optimum results.
Previous product
Back to products
Industrial Talc
$18.40 – $92.00 (inc. gst)
Next product
Geltex Latex Thickener
$17.25 – $172.50 (inc. gst)
Forton MG
$51.75 – $172.50 (inc. gst)
Related products
Epoxycast Clear Casting Resin
Epoxycast Clear Casting Resin Epoxycast Clear Casting Resin is a two-part, clear system specifically designed for casting small to medium-sized
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Langridge Dry Artist Pigment
Langridge Dry Artist Pigments offer gorgeous metallics, intense opaques and vibrant fluoros, that can be used to pigment our resin
Pipette Dispenser
An easy and economical way of measuring out those small amounts of MEKP catalyst and colouring resin among other applications.
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
Copper Powder
Copper powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
