Our Dome No.4 Ring Mould is a ready to use silicone mould that may be used with a variety of casting materials. An appropriate casting resin such as an epoxy or polyurethane is a popular choice, but other materials like wax may also be used. The mould was made from a ring which was originally sculpted from clay and is handmade in character. Note: all measurements are approximate. Due to the handmade nature of this mould, imperfections may exist in the mould and dimensions may change when cast piece is sanded.
Finish: Gloss
Resin required to fill: Approx. 15ml
Ring size: S-T
Previous product
Back to products
Dome Ring Variation No.3 Mould
$28.75 (inc. gst)
Next product
Deluxe Full Alanna Head Female Armature
$253.00 (inc. gst)
Dome Ring Variation No.4 Mould
$28.75 (inc. gst)
MLD-R9
Available at:
Auckland
Description
Related products
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Chopped Strand Mat 300gm
Our CSM 300gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Forton MG
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
Plastic Putty Knife 2 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Icypole Sticks
Icy pole sticks for mixing resins, not recommended for silicone or viscous materials. Great for adding and blending liquid and
Chopped Strand Mat 600gm
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Hanson Mixer
All purpose mixing blades that attach to a power drill to mix quantities of liquid. This brand mixes with less
