AF-7 Anti-Foaming Agent has been developed as an extremely effective, air release agent for Water Clear polyurethane material systems. Its purpose is to assist in the vacuum degassing procedure by reducing surface tension of entrained air bubbles in the mix. When stirred in to already mixed A & B components, the AF-7 Anti-Foaming Agent works to break the material surface tension. This product is sold in a pint/approx. 473ml in volume.
Note: AF-7 does not replace the need for pulling a vacuum on casting materials to eliminate air.
Previous product
Back to products
Apoxie Sculpt 4lbs
$195.50 (inc. gst)
Next product
Square Armature Wire
$82.80 (inc. gst)
AF-7 Anti-Foaming Agent
$69.00 (inc. gst)
Description
Related products
Aluminium Granules
Aluminium Granules are commonly used as a filler in resin moulds for vacuum forming and low pressure injection. Imparts high
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
Q-Cel 520
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
Bronze Powder
Bronze powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Aluminium Powder
Aluminium Powder is traditionally added to resins to aid in high temp applications such as vacuum forming. It is commonly
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Forton MG
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
