Aluminium Granules are commonly used as a filler in resin moulds for vacuum forming and low pressure injection. Imparts high strength and minimal distortion. It is commonly mixed with Epoxy Resin and Polyurethanes. Aluminium Granules is also used with resins to create a cold cast metal effect. The granules are mixed with the resin and then buffed or sanded once cured, creating a speckly grit finish. Please note that the colour of the metal particals may vary between batches and can change over time due to oxidisation. If you require a consistant colour, please order a quantity that is large enough to complete your project rather than buying smaller quantities as you need it. The Aluminium Granules have an average particle size (D50) of 400 Micron.
Previous product
Back to products
Surface Tissue
$7.48 (inc. gst)
Next product
Brass Powder
From $51.75
Aluminium Granules
$57.50 (inc. gst)
Related products
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Epoxycast Clear Casting Resin
Epoxycast Clear Casting Resin Epoxycast Clear Casting Resin is a two-part, clear system specifically designed for casting small to medium-sized
Copper Powder
Copper powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Aluminium Powder
Aluminium Powder is traditionally added to resins to aid in high temp applications such as vacuum forming. It is commonly
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
Brass Powder
Brass powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
