Use Alumilite dyes to add colour to your casting resins! These opaque dyes may be used in both clear and opaque resins. Always conduct your own tests to see if the dye and resin combination achieve the colour you require!
Previous product
Back to products
Clear Guard Spray
$74.75 (inc. gst)
Next product
RD407 Mask Making Latex
From $69.00
Alumilite Resin Dye
$25.30 (inc. gst)
Description
Use smallest amount possible to achieve desired colour (up to 5%)
Alumilite Dye is very concentrated. In some instances it’s necessary to use less than 1 drop to achieve colour in a small resin batch. This can be achieved by adding a drop of dye to the tip of a mixing stick rather than dispensing into the resin.
Opaque dyes contain fillers that may settle in the bottle. To maintain consistent colour, agitate/stir prior to use.
Related products
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
Bronze Powder
Bronze powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
AF-7 Anti-Foaming Agent
AF-7 Anti-Foaming Agent has been developed as an extremely effective, air release agent for Water Clear polyurethane material systems. Its
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Aluminium Granules
Aluminium Granules are commonly used as a filler in resin moulds for vacuum forming and low pressure injection. Imparts high
Iron Powder
Iron powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
