BJB’s SC-24 is a general purpose accelerator which can be used to reduce demold times of a variety of BJB polyurethane products. Note that this will also shorten the working-time of the polyurethane system after SC-24 is added. SC-24 should be added to the B side prior to mixing with A side in the amount of 1% to 2% of the total weight of the A/B system. A
small scale test should be performed to evaluate the reaction time with the particular product being used. SC-24 will have a varying degree of effectiveness with different material system. We do not recommend using this product with BJB water clear series.
Previous product
Back to products
PTFLEX 50
From $460.00
Next product
TC892 Slow Set Rigid Polyurethane
From $207.00
SC24 POLYURETHANE ACCELERANT
From $40.25
Description
Related products
Anti-Foaming Agent AF-7 Pint
AF-7 Anti-Foaming Agent has been developed as an extremely effective, air release agent for Water Clear polyurethane material systems. Its
Iron Powder
Iron powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
D-Limonene 1L
DLIM-S
Q-Cel 520
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
JA12 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA12 stick is between 210-280 grams***
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Bronze Powder
Bronze powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Chopped Strand Mat 300gm
Our CSM 300gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
