PT Flex 50 Liquid Rubber is a two-part, liquid polyurethane system that cures (RTV) to a yellow/amber, Shore A50 rubber. PT Flex Series rubbers were specifically designed for prototyping and model making applications and offer fast pour times (~5 minutes) and fast demold times (~2 hours).
Previous product
Back to products
EasyFlo 60
$1,207.50 (inc. gst)
Next product
SC24 POLYURETHANE ACCELERANT
$40.25 – $828.00 (inc. gst)
PTFLEX 50
$460.00 – $1,725.00 (inc. gst)
Related products
Forton MG
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
JA6 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA6 stick is between 220-310 grams***
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
Pipette Dispenser
An easy and economical way of measuring out those small amounts of MEKP catalyst and colouring resin among other applications.
Aluminium Powder
Aluminium Powder is traditionally added to resins to aid in high temp applications such as vacuum forming. It is commonly
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
JA8 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA8 stick is between 250-400 grams***
