This is the brush we prefer to use when chopping our Stone Coat Countertop epoxy as well as brushing edges. Clean with Acetone and remove any loose bristles before using. This 2 x 2” Short Handled Chop Brush will greatly help with bubble dispersion when using Stone Coat Countertop Epoxy resin.
Previous product
Back to products
Flowcoat White
$57.50 – $161.00 (inc. gst)
$46.00 – $128.80 (inc. gst)
$46.00 – $128.80 (inc. gst)
Next product
Scrim
$5.75 – $368.00 (inc. gst)
$4.60 – $294.40 (inc. gst)
$4.60 – $294.40 (inc. gst)
Stone Coat Epoxy Chop Brush
$13.23 (inc. gst) $10.58 (inc. gst)
SC-CHOP
Available at:
Auckland
Related products
Langridge Dry Artist Pigment
Langridge Dry Artist Pigments offer gorgeous metallics, intense opaques and vibrant fluoros, that can be used to pigment our resin
Brass Powder
Brass powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Aluminium Granules
Aluminium Granules are commonly used as a filler in resin moulds for vacuum forming and low pressure injection. Imparts high
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Epoxycast Clear Casting Resin
Epoxycast Clear Casting Resin Epoxycast Clear Casting Resin is a two-part, clear system specifically designed for casting small to medium-sized
Epoxyglass Clear Coating Epoxy Resin
EPOXYGLASS is a two part ultra clear epoxy coating resin used by professional artists and hobbyists Australia wide. EPOXYGLASS is
