No products in the cart.
Previous product
Back to products
Petroleum Jelly
From $6.90
Next product
Stone Coat Epoxy Chop Brush
$13.23 (inc. gst)
Flowcoat White
$57.50 (inc. gst)
Description
Flowcoat White is a waxed pigmented resin that is normally brushed on as a top sealing coat. Good for general fibreglass repairs or new parts as a topcoat sealer.
Flowcoat White gives a tidy UV protected surface and is commonly used in bilge/anchor/floors/pocket areas to give a tidy & clean finish.
Use between 1% to 2% hardener for volume/weight. 1kg will cover about 0.7m2 of clean & smooth fibreglass surface. 1kg = 750mls of product.
Related products
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Q-Cel 520
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
Chopped Strand Mat 600gm
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Forton MG
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
Epoxycast Clear Casting Resin
Epoxycast Clear Casting Resin Epoxycast Clear Casting Resin is a two-part, clear system specifically designed for casting small to medium-sized
JA8 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA8 stick is between 250-400 grams***
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
Brass Powder
Brass powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
