This material allows the user to laminate fibreglass moulds directly onto wet clay. The vinyl spray is applied to the clay surface as a barrier coat to seal in any moisture from the clay sculpt or walls. Use in conjunction with a suitable release agent such as J-Wax. The Vinyl Spray also imparts some protective properties to the sculpt while the moulds are being produced.
Previous product
Back to products
WC786 Water Clear Rigid Polyurethane
$368.00 – $2,231.00 (inc. gst)
Next product
Brown Microcrystaline Wax
$34.50 (inc. gst)
Vinyl Strip Spray 400g Can
$40.25 (inc. gst)
Available at:
Auckland
Related products
Chopped Strand Mat 600gm
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Aluminium Granules
Aluminium Granules are commonly used as a filler in resin moulds for vacuum forming and low pressure injection. Imparts high
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
JA12 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA12 stick is between 210-280 grams***
Chopped Strand Mat 300gm
Our CSM 300gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Industrial Talc
Industrial Talc is a budget priced filler for reducing cost and exotherm in resins. Also used as a surface tension
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
