S-FOAM 128 Flex Polyurethane Foam is a variable ratio, self-skinning, 128kg density flexible foam. Skin thickness is controlled by material and mould temperature, and the loading of the mouLd. BJB Pigments may be added to the “B” side for developing a wide range of colours. S-FOAM 128 Flex Polyurethane Foam can be mixed by hand with a spatula, high shear mixer or machine dispensed. The 50/100 ratio yields the standard firm density of 128kg/m³, while mixing at 30/100 ratio will result in a softer feel but the density will increase 208kg/m³. This system is perfect for bumpers and crash pads, arms rests and seat cushions, movie props and special effects devices.
Previous product
Back to products
MD60 High Impact Resistant Rigid Polyurethane
$103.50 – $2,242.50 (inc. gst)
Next product
S-FOAM 50 Flex Polyurethane Foam
$69.00 – $747.50 (inc. gst)
S-FOAM 128 Flex Polyurethane Foam
SKU: U-SFOAM128
$161.00 – $1,495.00 (inc. gst)
Related products
Brass Powder
$51.75 – $414.00 (inc. gst)
Brass powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Omyacarb 40
$25.30 – $40.25 (inc. gst)
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
Sold out
![](https://www.barnesnz.co.nz/wp-content/uploads/myintegrator/products/DLIM-S_1-600x600.png 600w, https://www.barnesnz.co.nz/wp-content/uploads/myintegrator/products/DLIM-S_1-300x300.png 300w, https://www.barnesnz.co.nz/wp-content/uploads/myintegrator/products/DLIM-S_1-1024x1024.png 1024w, https://www.barnesnz.co.nz/wp-content/uploads/myintegrator/products/DLIM-S_1-150x150.png 150w, https://www.barnesnz.co.nz/wp-content/uploads/myintegrator/products/DLIM-S_1-1536x1536.png 1536w, https://www.barnesnz.co.nz/wp-content/uploads/myintegrator/products/DLIM-S_1-2048x2048.png 2048w, https://www.barnesnz.co.nz/wp-content/uploads/myintegrator/products/DLIM-S_1-1200x1200.png 1200w, https://www.barnesnz.co.nz/wp-content/uploads/myintegrator/products/DLIM-S_1.png 1500w)
Close
JA12 Alloy Stick
$212.75 (inc. gst)
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA12 stick is between 210-280 grams***
Q-Cel 520
$103.50 – $161.00 (inc. gst)
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
Chopped Strand Mat 300gm
$7.48 (inc. gst)
Our CSM 300gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
AntiCrak Fibre 13mm 500g
$40.25 (inc. gst)
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
JA6 Alloy Stick
$230.00 (inc. gst)
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA6 stick is between 220-310 grams***