This ready to use silicone mould is great for creating long, hexagonal crystals with a point. These moulds are great for Epoxy and UV resin casting. No release agent is required. Jewelery screws and hooks may be inserted into the resin at the top of the mould. Keep away from abrasive materials to avoid scratching the silicone. Mould may be washed with warm, soapy water.
Measurement: approx. 1.2cm (W) x 4.5cm (H) / 0.45″ (W) x 1.78″ (H)
Previous product
Back to products
Stone Coat Ultimate Top Coat
From $161.00
Next product
Silicone Mould Rectangle Bar 45mm
$13.80 (inc. gst)
Silicone Mould Pointed Bar 45mm
$13.80 (inc. gst)
Available at:
Auckland
Description
Related products
Glossy Cuff Bangle Mould
MLD-B13
Tongue Depressors Box 100/Box
Wooden tongue depressors allow for mixing of resins, silicones and blending pigments.
Liquid Latex
Liquid Latex is still one of the most widely used materials for flexible mould making. This natural latex material has
Forton MG
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
Brush Latex
Brush latex is a moulding compound based on pre-vulcanized natural rubber latex. Pre-vulcanized latex is recommended for mould production as
Plastic Cups
The plastic polypropylene cups are great for mixing resins and silicones, especially when you ant clarity and visibility of the
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Plastic Putty Knife 1.5 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
