No products in the cart.
Previous product
Back to products
Tom Thumb Ring Mould
$28.75 (inc. gst)
Next product
Dome Ring Variation No.4 Mould
$28.75 (inc. gst)
Faceted Ring Mould
$28.75 (inc. gst)
MLD-R6
Available at:
Auckland
Description
Our Faceted Ring Mould is a ready to use silicone mould that may be used with a variety of casting materials. An appropriate casting resin such as an epoxy or polyurethane is a popular choice, but other materials like wax may also be used. The mould was made from a ring which was originally sculpted from clay and is handmade in character. Note: all measurements are approximate. Due to the handmade nature of this mould, imperfections may exist in the mould and dimensions may change when cast piece is sanded.
Finish: Gloss
Resin required to fill: Approx. 10ml
Ring size: S
Related products
Chopped Strand Mat 600gm
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Woven Bangle Mould
MLD-B1
Plastic Putty Knife 2 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Small Carved Bangle Mould
MLD-B15
Icypole Sticks
Icy pole sticks for mixing resins, not recommended for silicone or viscous materials. Great for adding and blending liquid and
Chromax Dental Alginate
Chromax Dental Alginate is a high-precision dental alginate impression material with a chromatic phase and set indicator. This dental alginate
Tongue Depressors Box 100/Box
Wooden tongue depressors allow for mixing of resins, silicones and blending pigments.
