Honeycomb Patina is designed to create a golden brown finish on all metals. The reaction causes a golden brown finish on iron, steel, aluminum, zinc, and stainless steel. On bronze, brass, and copper the patina is a warm brown. Honeycomb Patina is supplied as a ready to use formula on clean metal. Honeycomb can also be diluted with distilled water if desired.
Directions:
Use in a well ventilated area. Always wear goggles or face shield, vapor respirator, protective clothing, and gloves when handling the product. Store between 10-32*C.
1. Clean the metal with Sculpt Nouveau Metal Cleaner and Degreaser and a scotch-brite pad, rinse with distilled water after a few minutes. For more consistent and better reactions, sanding or sandblasting is recommended. Cleaning the surface is mandatory after sanding or handling with bare hands. DO NOT use Acetone or apply any solvent based cleaners.
2. Apply Honeycomb Patina to the metal surface by brush, sponge, roll or spray bottle. Which ever option you choose will react with the surface, but it may show characteristics based on application method. Spraying is the most common method. Massaging the patina into the metal with a brush is the most common method. A normal reaction time for a cold process is 3-5 minutes though shorter or longer times will vary depending on climate variables and desired finish colour. Rinse the patina with water to neutralize the acid and stop the reaction. DO NOT allow the patina to dry on the surface.
3. Re-apply the patina as needed to achieve a darker or more uniform finish. Follow steps 2-4 if needed. If needed, you can also use the 3 different techniques together by layering for unique finishes.
4. Heat the metal with a torch or heat gun to evaporate excess water in the metal. Then apply desired clear coat such as Clear Guard or Ever Clear.
Sculpt Nouveau *HERE*
