Our Trapeze Ring Mould is a ready to use silicone mould that may be used with a variety of casting materials. An appropriate casting resin such as an epoxy or polyurethane is a popular choice, but other materials like wax may also be used. The mould was made from a ring which was originally sculpted from clay and is handmade in character. Note: all measurements are approximate. Due to the handmade nature of this mould, imperfections may exist in the mould and dimensions may change when cast piece is sanded.
Finish: Semi-Gloss
Resin required to fill: Approx. 10ml
Ring size: U-V
Previous product
Back to products
Slant Ring Mould
$28.75 (inc. gst)
Next product
Low Dome Ring Mould
$28.75 (inc. gst)
Trapeze Ring Mould
$28.75 (inc. gst)
MLD-R14
Available at:
Auckland
Description
Related products
Long Plastic Stirrer
Long plastic stirrers are designed for paint mixing but work well with resins and other materials.
Rounded Square Bangle Mould
MLD-B14
Chopped Strand Mat 600gm
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Forton MG
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
Eclipse Bangle Mould
MLD-B11
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Plastic Putty Knife 2 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Glossy Cuff Bangle Mould
MLD-B13
