SMASH-IT is a breakaway blend made from high quality resins and polymers to give a unique glass effect. This product has been widely used on many film and TV productions. Glass like clarity. Can be heated and hand poured. Will shatter like glass. Can be colored using oil soluble dyes mixed in white oil. Melting point 115 degrees Celsius, Softening Point 105 degrees, Density 1.1 g/cc. SMASH-IT is best heated in purpose built wax melting pots, that the temperature is properly controlled, as excessive temperature will cause the product to yellow and temperatures should never exceed 160 degrees Celsius. The normal pouring temperature of SMASH-IT is 120 140 degrees Celsius. for best results SMASH-IT should be poured into silicone rubber moulds or silicone coated moulds. Purpose built table for casting glass panels are also widely used. Effects can also be created, such as using aluminium foil for a frosted effect.
Previous product
Back to products
White Bristle Brush
From $1.38
Next product
Tufsil 28 Condensation Silicone Rubber
$672.75 (inc. gst)
Smash-It
From $69.00
Related products
Bronze Wool
A high quality bronze wool that is used when buffing or polishing back a bronze surface. This eliminates the problems
Iron B Coating
The Metal Coatings are ground metal suspended in a non-toxic water based acrylic binder. They may be applied to both
Japanese Brown Patina
Japanese Brown may be used on bronze, brass, and copper resulting in a golden brown finish, but it is most
Tan Patina
Tan Patina is used to achieve an opaque tan finish on all metals. It may be applied hot or cold
Prime-It for Metal Coatings
When applying traditional or acid patinas to the Metal Coatings over iron, steel, or aluminum, a primer must first be
Clear Wax For All Metals
The finest quality waxes have been blended into a nonabrasive formula specifically to protect patinas and metal finishes. These waxes
Light Green Patina
Light Green Patina is a cold patina for bronze, brass, and copper. Apply to a clean, cold (65°-70°F) metal. It
Powder Blue Patina
Powder Blue is a cold patina for bronze, brass, copper, and the Metal Coatings. This patina results in a stable
